A Step-by-Step Guidelines: Linksys RE7000 Setup via http myrouter local setup

Are you looking for ways to boost the network range? Well, you can easily do it from Linksys re7000 setup. Linksys re7000 is a WiFi range extender device that helps in eliminating the dead spots, delivering WiFi coverage up to 10,000 square feet. This product is using advanced technology to push the network of your router to the long distance into your home or office. This WiFi extender comes with an efficient and easy setup process. You can easily do the Linksys re7000 setup using the two ways such as using the range extender mode and access point mode. Once you set up your Linksys device, you can enjoy gaming and streaming on several devices at the same time. Scroll down from top to bottom to learn the ways to set up the Linksys range extender through the http myrouter local setup.

Quick Steps for Linksys Re7000 Setup via http myrouter local setup

Go through the below steps for Linksys re7000 setup on your device by accessing http myrouter local setup webpage:

Step 1: Firstly, you need to plug in your extender device to the power outlet.

Step 2: After that, turn on the power button on your extender device and wait for some time until the power LED light on the extender turns orange.

Step 3: Thereafter, connect your Linksys re7000 extender device to your computer system or any other device with which you want to connect.

Step 4: In the next step, launch any updated internet browser of your choice from your computer.

Step 5: Type http myrouter local setup in the address bar of the internet browser. Click on the enter button to proceed further.

Step 6: In case, the default web address does not work for your WiFi extender then you can try the default IP address to open the Linksys re7000 extender login webpage.

Step 7: Once the extender login screen appears then enter the admin username and password to the login credential details of your range extender. Click on the login button.

Step 8: You can easily find the login credentials details on the label present on the backside of the panel on the extender.

Step 9: After logging in to the extender device, tap on the Start Setup option from the web dashboard.

Step 10: Select the “Set up as a range extender” and tap on the Next button to proceed further.

Step 11: Now, scan for all the available networks and choose your existing network name from the given list. Enter the WiFi password if required to connect with the network.

Step 12: Create the wireless name and password for your extended network.

Step 13: After that, click on the Save button to apply the changes made by you.

Step 14: Thereafter, place your Linksys re7000 extender to any place of your choice. Now, use the Spot Finder Function to find the signal strength between the router and the extender.

Well, with the above-mentioned steps you can easily perform Linksys re7000 setup in an extender mode without any hassle. One thing that you need to make sure of is to update the extender firmware with the latest available version to avoid errors.